Showing all 9 results
Aluminum spacer for ISO/English or BSA threaded bottom brackets. Spacers fit between bottom bracket cup and frame. Great for fine tuning bottom bracket shells or improving chainline.
Replacement outer seals and o-rings for PF30 BB30bottom brackets with 24mm crank (Shimano) bottom bracket.
The BBUNIV-SRAM kit adapts SRAM/Truvativ cranks to virtually any BB/PF30 frame, including mountain bikes, 2×10 systems, narrow-shell road bikes, road triples, Cannondale BB30a & PF30a, etc. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust the chain line, or to take up any side-to-side movement in the crank.
The BBUNIV-SHIM kit adapts Shimano or similar 24mm cranks to virtually any BB30/PF30 frame, including mountain bikes, 2×10 systems, narrow-shell road bikes, road triples, etc. For use only with bottom bracket shell widths from 68mm to 83mm.
The PF30-SRAM adapts cranks with 22/24 mm spindles (SRAM/Truvativ) to work on Pressfit 30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks.
The PF30-SHIM adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks.
Replacement spacer pack for 22/24mm (GXP) bottom brackets. Individual bearings sold separately.
Replacement spacer pack for 24m (Shimano) bottom brackets. Individual bearings sold separately.
Replacement spacer pack for 30mm spindle bottom brackets. Individual bearings sold separately.
No products in the cart.