Showing 61–80 of 453 results
Our 6904 over axle adapter is used to press 6904 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Sealed bearing extractor for 22mm ID (GXP) bearings. Extractor has 1/2″ thru hole for use with our 1/2″ threaded rod press handles.
Sealed bearing extractor for 24mm ID bearings. Extractor has 1/2″ thru hole for use with our 1/2″ threaded rod press handles.
BB86/92 30mm Flanged Dual Row Black Oxide (2)
Sealed bearing extractor for 25mm ID bearings. Extractor has 1/2″ thru hole for use with our 1/2″ threaded rod press handles.
Our 6804 open bore adapter is used to press 32×20 sealed bearings. The adapter is machined with one step at 20mm OD, which fits into the center of the sealed bearing.
Our 6805 open bore adapter is used to press 37×25 sealed bearings. The adapter is machined with one step at 25mm OD, which fits into the center of the sealed bearing.
Receiver cup sleeve for Wheels Mfg sealed bearing extractors. Machined aluminum sleeve, anodized red with 39mm ID and 52mm OD. 1/2″ thru hole to fit over our 1/2″ threaded rod press handles.
All Wheels Manufacturing replacement derailleur hangers are manufactured in Louisville, Colorado to exacting tolerances.
Receiver cup sleeve for Wheels Mfg sealed bearing extractors. Machined aluminum sleeve, anodized red with 42mm ID and 52mm OD. 1/2″ thru hole to fit over our 1/2″ threaded rod press handles.
Receiver cup sleeve for Wheels Mfg sealed bearing extractors. Machined aluminum sleeve, anodized red with 44mm ID and 52mm OD. 1/2″ thru hole to fit over our 1/2″ threaded rod press handles.
Receiver cup for Wheels Mfg sealed bearing extractors. Machined aluminum cup, anodized red with 60mm OD and 52mm ID. 1/2″ thru hole to fit over our 1/2″ threaded rod press handles.
Our 688 open bore adapter is used to press 688 sealed bearings. The adapter is machined with one step at 7.9mm OD, which fits into the center of the sealed bearing.
Pusher for Wheels Mfg sealed bearing extractors. 1/2″ thru hole to fit over our 1/2″ threaded rod press handles.
Our 688 over axle adapter is used to press 688 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Our 608 open bore adapter is used to press 608 sealed bearings. The adapter is machined with one step at 7.9mm OD, which fits into the center of the sealed bearing.
The bearing extractor kit set 22mm includes the following:
The bearing extractor kit set SRAM 22/24mm includes the following:
The bearing extractor kit set 25mm includes the following:
The bearing extractor kit set 30mm includes the following: