24mm Sealed Bearing Extractor
$18.04Individual extractor for removing 2437 sealed bearing.
Bearing ID: 24mm / OD: 37mm / Width: 7mm
Showing 41–60 of 76 results
-
-
30mm – Sealed Bearing Extractor
$18.04Individual extractor for removing 6806 sealed bearing.
Bearing ID: 30mm / OD: 42mm / Width: 7mm
-
15 x 25 Over Axle Press Speed Spacer
$6.08Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don’t need to spin the handles as far to tighten things up. 15mm thru hole size makes this perfect for use on hubs with larger axles.
-
29 x 42 DUB Open Bore Adapter
$6.0829mm open bore adapter is used to press 29mm x 42mm sealed bearings. The adapter is machined with one step at 29mm OD, which fits in to the center of the sealed bearing. For use with Wheels Mfg Bottom Bracket Press (PRESS-7, PRESS-7-PRO or PRESS-9-PRO)
-
8mm x 22mm Over Axle Adapter
$6.15Our 608 over axle adapter is used to press 608 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
-
9 x 24 Open Bore Adapter
$6.08Our 609 open bore adapter is used to press 609 sealed bearings. The adapter is machined with one step at 8.9mm OD, which fits into the center of the sealed bearing.
-
9mm – Sealed Bearing Extractor
$12.96Individual extractor for removing.
- 609 sealed bearing: Bearing ID: 9mm / OD: 24mm / Width: 7mm
- 9227 sealed bearing: Bearing ID: 9mm / OD: 22mm / Width: 7mm
-
BB30-OUT Bottom Bracket Cup Drift
$16.20Our BB30-OUT open bore adapter, also referred to as a drift, is used to press BB30-OUT cups in to your frame. The adapter is machined with two steps: one at 24mm OD slips in to the center of the sealed bearing, and a larger step at 42mm OD to fit the frame’s BB shell.
Note: Discontinued item. Sold as-is. No returns.
-
22 x 30 Over Axle Bearing Press Speed Spacer
$6.08Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don’t need to spin the handles as far to tighten things up. The bearing press speed spacer 10mm.
-
15mm x 35mm Bearing Press Speed Spacer
$6.08Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don’t need to spin the handles as far to tighten things up. They also work in axle configurations where you need to press in a bearing over an axle.
-
20 x 25 Over Axle Bearing Press Speed Spacer
$6.08Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don’t need to spin the handles as far to tighten things up. 20mm thru hole size makes this perfect for use on hubs with larger axles.
-
20 x 35 Over Axle Bearing Press Speed Spacer
$6.08Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don’t need to spin the handles as far to tighten things up. They also work in axle configurations where you need to press in a bearing over an axle.
-
Bottom Bracket Socket
$40.46Double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups SKU BBTOOL-48-44. Compatible with all Wheels Manufacturing bottom brackets. Socket is machined for 1/2″ drive, but a 3/8″ to 1/2″ adapter is included so you can use it with 3/8″ drive torque wrenches.
-
10 x 16 Over Axle Drift Spacer
$6.15Frame linkage standoff works with our bearing press handles as a spacer to allow the press handles to fully seat bearings over suspension linkages that protrude beyond the face of the bearing.
-
22 x 37 Open Bore Adapter
$6.08Our GXP-LEFT open bore adapter is used to press 22×37 sealed bearings in to SRAM GXP bottom bracket cups and direct fit frames like TREK BB90. The adapter is machined with one step at 22mm OD, which fits in to the center of the sealed bearing.
-
Headset Cup Drift
$26.24Headset cup drifts for use with the Wheels Mfg Headset Cup Press. 1/2″ thru hole. Drift is machined with steps to fit common headset cups with 1-1/8″ and 1-1/2″ bearings. May work with other size cups. Not recommended for use with Wheels Mfg PRESS-1 or PRESS-4 handles and rod, which have a smaller 3/8″ diameter rod.
-
Headtube Drift
$26.24Headtube drifts for use with the Wheels Mfg Headset Cup Press. 1/2″ thru hole. Drift is machined with multiple steps to fit common head tube inner diameters listed below. Not recommended for use with Wheels Mfg PRESS-1 or PRESS-4 handles and rod, which have a smaller 3/8″ diameter rod.
-
Lockring Wrench
$20.25Hozan Lockring Wrench for use with Wheels Manufacturing Eccentric Bottom Brackets and Track Lockring (LOCKRINGTR).
-
10 x 26 Open Bore Adapter
$6.08Our 6000 open bore adapter, also referred to as a drift, is used to press 6000 sealed bearings.
-
12 x 28 Open Bore Adapter
$6.08Our 6001 open bore adapter is used to press 28×12 sealed bearings. The adapter is machined with one step at 12mm OD, which fits in to the center of the sealed bearing.