15 x 24 Open Bore Adapter
$6.08Our 6802 open bore adapter is used to press 24×15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Showing 61–76 of 76 results
-
-
10 x 22 Open Bore Adapter
$6.15Our 6900 open bore adapter is used to press 6900 sealed bearings. The adapter is machined with one step at 9.9mm OD, which fits into the center of the sealed bearing.
-
12 x 24 Open Bore Adapter
$6.08Our 6901 open bore adapter is used to press 24×12 sealed bearings. The adapter is machined with one step at 12mm OD, which fits in to the center of the sealed bearing.
-
17 x 30 Open Bore Adapter
$6.08Our 6903 open bore adapter is used to press 30×17 sealed bearings. The adapter is machined with one step at 17mm OD, which fits in to the center of the sealed bearing.
-
10 x 26 Over Axle Adapter
$6.08These drifts are spares for your most commonly used bearing sizes. They’re also an excellent addition to the Press-4
-
12 x 28 Over Axle Adapter
$6.08Our 6001 over axle adapter is used to press 6001 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
-
15 x 24 Over Axle Adapter
$6.08Our 6802 over axle adapter is used to press 6802 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
-
12 x 24 Over Axle Adapter
$6.08Our 6901 over axle adapter is used to press 6901 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing
-
17 x 30 Over Axle Adapter
$6.08Our 6903 over axle adapter is used to press 6903 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
-
Plastic Dowel For Large Sealed Bearing Press -1
$1.23Replacement 3/8″ x 3″ plastic dowels for our Large Sealed Bearing Press (PRESS-1).
-
Press 4 – Economy Bearing
$45.00An indispensable tool for the serious amateur bike mechanic or smaller bike shop, the Economy Bearing Press is designed for installation of bottom brackets or sealed bearings with a minimum I.D. of 10mm.
-
Press 7 – Universal Bottom Bracket
$70.00A do-it-all Universal Bottom Bracket Press. Economical and easy to use, this tool is made up of two machined aluminum handles, 1/2″ threaded rod and two machined aluminum drifts. Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed in the Compatibility tab below.
-
-
27 x 37 SRAM Predictive Steering Bearing Open Bore Adapter
$6.08SRAM Predictive Steering Bearing Open Bore adapter, also referred to as a drift, is used to press sealed bearings in to SRAM Predictive Steering front hubs. The adapter is machined with a 37mm OD, and a machined step at 27.5mm that slips in to the center of the sealed bearing. Compatible with our PRESS-1 or PRESS-4 sealed bearing press to press in the bearing.
-
Universal Bottom Bracket Drift
$13.94Designed to press in all current Wheels Mfg bottom brackets!
The Wheels Manufacturing universal bottom bracket drift is designed to press all current Wheels Mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed in the Compatibility tab below. Each step is laser etched with the diameter size.
-
Wheels Mfg Double End BB Wrench, 48.5mm / 44mm
$24.56Our very own double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. Machined aluminum, anodized red.
Compatible with all current Wheels Mfg bottom brackets with notched cups.