27 x 37 SRAM Predictive Steering Bearing Open Bore Adapter
$6.08
SRAM Predictive Steering Bearing Open Bore adapter, also referred to as a drift, is used to press sealed bearings in to SRAM Predictive Steering front hubs. The adapter is machined with a 37mm OD, and a machined step at 27.5mm that slips in to the center of the sealed bearing. Compatible with our PRESS-1 or PRESS-4 sealed bearing press to press in the bearing.
7 in stock
Description
SRAM Predictive Steering Bearing Open Bore adapter, also referred to as a drift, is used to press sealed bearings in to SRAM Predictive Steering front hubs. The adapter is machined with a 37mm OD, and a machined step at 27.5mm that slips in to the center of the sealed bearing. Compatible with our PRESS-1 or PRESS-4 sealed bearing press to press in the bearing.
- Installs: 27.5X37 bearing
- Inner Step Outer Diameter: 27.3mm
- Outer Diameter: 36.8mm
- Thru Hole Diameter: 0.387″ (9.8mm)
- Inner hole sized to fit 3/8″ threaded rod
- Compatible with PRESS-1 or PRESS-4 handles
- Machined, red anodized aluminum
- Sold individually (2 drifts required for some installations)
Additional information
| Weight | .15 oz |
|---|
Download: Bearing Press Adapter Instructions 
