Showing 21–40 of 453 results
Overhaul or upgrade your BB30 or PF30 (30mm crank spindle ) bottom brackets with ABEC-3 bearings. This kit contains OEM bearings, spacers, and dust cover seals straight from their factory to Bicycle Parts Direct exclusively.
Silver aluminum headset spacer for 1-1/8″ fork steerer. 2.5mm thick.
Upgrade your BB30 or PF30 series bottom bracket and eliminate squeaks with this OEM BB30 or PF30 (30mm crank spindle) overhaul kit containing Enduro SB-71806-1 Angular Contact bearings. Contains all serviceable parts needed for complete bottom bracket overhaul.
This is the OEM repair pack for Wheels Manufacturing SRAM GXP DUB compatible (29mm crank spindle) bottom brackets with ABEC-3 bearings. Contains all serviceable parts needed for complete bottom bracket overhaul.
The ultimate upgrade for your BB30 or PF30 series 30mm crank spindle bottom bracket with this OEM repair kit containing Enduro Ceramic Hybrid bearings. Contains all serviceable parts needed for complete bottom bracket overhaul.
1-1/8″ x 2.5mm Carbon Fiber Headset Spacer – Bag of 5
Silver aluminum headset spacers for 1-1/8″ fork steerer. 2.5mm thick.
Expand your choice of cranks for use in BB86/BB92/BB91/BB71-41/BB107 frames. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks (FSA BB386EVO, Rotor 3d+, RaceFace Next SL, e.thirteen) cranks in your frame.
T47 Outboard Series for 24/22mm Cranks
Shimano & SRAM compatible single speed conversion kit with ramped spacers. Black anodized.
Front derailleur shim for fitting a 1-1/8″ clamp-on front derailleur to a 1″ diameter seat tube. Delrin plastic won’t mar or scratch frame.
Silver aluminum headset spacers for 1-1/8″ fork steerer. 5mm thick.
R6 over axle adapter is used to press R6 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing. Machined, red or gray anodized aluminum
6900 over axle adapter is used to press 6900 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Silver aluminum headset spacer for 1-1/8″ fork steerer. 20mm thick.
6900 over axle adapter is used to press 6900 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Specifically designed for installing 22mm/24mm spindle diameter cranks (SRAM / Truvativ GXP) in BB30 (42mm ID BB shell) frames without the need for any adapters.
Our 6900 open bore adapter, also referred to as a drift, is used to press 6900 sealed bearings into hub shells or suspension components.
Black aluminum headset spacer for 1-1/8″ fork steerer. 20mm thick.