10 x 22 Over Axle Adapter
$6.15
R6 over axle adapter is used to press R6 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing. Machined, red or gray anodized aluminum
14 in stock
Description
R6 over axle adapter is used to press R6 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
- Installs: R6 bearing
- Outer Diameter: 22mm
- Thickness: 15mm
- Thru Hole Diameter: 9.6mm
- Compatible with PRESS-1 or PRESS-4 handles
- Machined, red or gray anodized aluminum
- Sold individually (multiple adapters required for some installations)
Additional information
| Weight | 6.80 oz |
|---|---|
| Tool Type | Hub / Suspension Tools |
| Drifts | 8mm to 10mm |
Compatible with:
- Large Sealed Bearing Press (PRESS-1)
- PRESS-1 Handle & Rod Assembly (PRESS-1-HNASSY)
- Economy Press (PRESS-4)
- Small Sealed Bearing Press (PRESS-2)
Download: Bearing Press Adapter Instructions 
No products found
